Description
Product Features:
One-piece die-cast aluminum housing., fully sealed to be dirt and bug proof.
One-piece silicone perimeter lens gasket and closed-cell neoprene housing gasket help to seal out moisture and contaminants.
High quality shock proof polycarbonate lens with UV inhibitors.
Integral secondary heat sink to optimize thermal transfer and maximize performance and life of LED.
Driver is mounted in direct contact with the casting for a low operating temperature and long life.
Instruction:
Mounting and wiring：Two (2) options: Arm Slip Fitter, Arm Slip
Environmental system：ETL listed, IP65 rated and suitable for wet locations.
Electrical sytstem：Integral high performance led driver. SPD 10kV,10KA
Universal input voltage 100-277VAC, 50/60Hz.
Optical system：Patent pc lens, light transmittance>92%, easy to install and disassemble
High performance smd leds mounted on metal core board and integral aluminum heat sink.
Bug ratings：B3 (maximum) -U1(maximum) –G3(maximum) and uplight ul & uh=0 (full cutoff).
Application：Roadway lighting (urban roads, highway roads, streets, residential areas, overpasses…)
Public areas lighting (theme parks, squares, parking lots, residential areas…)
Specification:
| PHYSICAL SPECIFICATION | |
| Housing material | Die-cast aluminum |
| Housing finish colour | Bronze (white, gray , black options) |
| ENVIRONMENTAL SPECIFICATION | |
| Operating temp. | -30–130°F (-34–54°C) |
| Operating humidity | 20–85% RH, Non-condensing |
| Storage temp. | -40–140°F (-40–60°C) |
| ELECTRICAL SPECIFICATION | |
| Input voltageNote.1 | 120 – 277Vac (Standard), 347 – 480Vac (Optional), 220-240Vac (Optional) |
| Power factor | ＞0.95 |
| Total harmonic distortion | 15% MAX. |
| Transient voltage and | Transient voltage and surge suppression capability that meet or exceeds the requirements of ANSI/IEEEC.62.41-2002 location Category c low exposure. |
| Surge suppression | |
| Capability | |
| PHOTOCELL & CONTROLS | |
| NEMA Socket | 3PIN (Standard), 5PIN, 7PIN (Optional) |
| Sensor SpecificationsNote.2 | Photocontrol, ANSI C136.41Standard,ul listed, standard/Dimming optional. |
| Control & Monitoring | Dimming power supply (0/1-10V) is optional equipment. We offer a complete range of control and monitoring solutions. |
| PERFORMANCE AND WARRANTY | |
| LED L70 (Hours) | > 100,000 hours @ maximum drive current |
| Warranty | 5 years |
| LISTING AND CERTIFICATES | |
| ETL,DLC | |
For more information, you can check our youtube channel.
